Wave cupcake wrapper SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A low wrapper with a rolling wave along its top and two rows of wave-shaped slots, for a beach, pool or pirate party. Cut 208 mm wide, it wraps a standard case but stands only 38 mm up its side, so more of the cake shows.
What is in the file
| Size | 100 × 38 mm (3.94 × 1.48 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 14: 1 outer edge and 13 cut-outs |
| Cut length | 638 mm at this size |
| Narrowest part | 2.1 mm at this size |
| Nodes | 207 curve and line segments |
Measured from the file. PNG: 2,000 × 798 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.38 in (25 × 10 mm) | 0.53 mm | 162 mm | 210 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.75 in (51 × 19 mm) | 1.1 mm | 324 mm | 60 | Vinyl, card and thin sheet |
| 3 × 1.13 in (76 × 29 mm) | 1.6 mm | 486 mm | 27 | Vinyl, card and thin sheet |
| 4 × 1.5 in (102 × 38 mm) | 2.1 mm | 648 mm | 14 | Vinyl, card and thin sheet |
| 6 × 2.25 in (152 × 57 mm) | 3.2 mm | 972 mm | 4 | Any material, including 3 mm wood and acrylic |
| 8 × 3 in (203 × 76 mm) | 4.3 mm | 1,296 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 4.5 in (305 × 114 mm) | 6.4 mm | 1,945 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More cupcake wrapper SVG files
-
Mini cupcake wrapper with stars Solid · one piece -
Tall cupcake wrapper with hearts Solid · one piece -
Two scalloped cupcake wrappers on one sheet Solid · 2 pieces -
Cupcake stand tier to match the wrappers Solid · 3 pieces -
Scallop edge cupcake topper to match the wrappers Solid · one piece -
Cupcake wrapper template to print and cut by hand Outline · 2 pieces -
Mini cupcake wrapper in two colours Layered · 2 pieces -
Scalloped cupcake wrapper Solid · one piece
← Cross cupcake wrapper All 13 cupcake wrappers Mini cupcake wrapper with stars →