Scalloped cupcake wrapper SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The everyday wrapper: a curved band with eighteen scallops along the top and an arrow that locks through a slit, so it needs no glue. Cut 229 mm wide, it wraps a case 51 mm across the base and stands 51 mm up its side, opening to 76 mm at the rim.
What is in the file
| Size | 100 × 41 mm (3.94 × 1.59 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 2: 1 outer edge and 1 cut-out |
| Cut length | 326 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 62 curve and line segments |
Measured from the file. PNG: 2,000 × 856 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.41 in (25 × 10 mm) | Over 1.5 mm | 83 mm | 200 | Vinyl, card and thin sheet |
| 2 × 0.81 in (51 × 21 mm) | Over 3 mm | 166 mm | 60 | Any material, including 3 mm wood and acrylic |
| 3 × 1.21 in (76 × 31 mm) | Over 4.6 mm | 248 mm | 24 | Any material, including 3 mm wood and acrylic |
| 4 × 1.62 in (102 × 41 mm) | Over 6.1 mm | 331 mm | 12 | Any material, including 3 mm wood and acrylic |
| 6 × 2.43 in (152 × 62 mm) | Over 9.1 mm | 497 mm | 4 | Any material, including 3 mm wood and acrylic |
| 8 × 3.24 in (203 × 82 mm) | Over 12 mm | 662 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 4.86 in (305 × 123 mm) | Over 18 mm | 994 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More cupcake wrapper SVG files
-
Plain cupcake wrapper with a glue tab Solid · one piece -
Lace cupcake wrapper Solid · one piece -
Crown cupcake wrapper Solid · one piece -
Cross cupcake wrapper Solid · one piece -
Wave cupcake wrapper Solid · one piece -
Mini cupcake wrapper with stars Solid · one piece -
Tall cupcake wrapper with hearts Solid · one piece -
Two scalloped cupcake wrappers on one sheet Solid · 2 pieces
← Mini cupcake wrapper in two colours All 13 cupcake wrappers Plain cupcake wrapper with a glue tab →