Two scalloped cupcake wrappers on one sheet SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The scalloped wrapper twice, nested one under the other so that both cut from a single sheet of A4 or Letter card. Cut 229 mm wide, the pair is 175 mm tall and each wrapper fits a standard case. Loose pieces.
What is in the file
| Size | 100 × 76 mm (3.94 × 3 in), scales to any size |
|---|---|
| Pieces | 2 separate pieces |
| Outlines to cut | 4: 2 outer edges and 2 cut-outs |
| Cut length | 652 mm at this size |
| Narrowest part | 3.9 mm at this size |
| Nodes | 124 curve and line segments |
Measured from the file. PNG: 2,000 × 1,544 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.76 in (25 × 19 mm) | 0.99 mm | 166 mm | 120 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.53 in (51 × 39 mm) | 2 mm | 331 mm | 35 | Vinyl, card and thin sheet |
| 3 × 2.29 in (76 × 58 mm) | 3 mm | 497 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.05 in (102 × 78 mm) | 4 mm | 662 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 4.58 in (152 × 116 mm) | 5.9 mm | 994 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6.1 in (203 × 155 mm) | 7.9 mm | 1,325 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 9.16 in (305 × 233 mm) | 12 mm | 1,987 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More cupcake wrapper SVG files
-
Cupcake stand tier to match the wrappers Solid · 3 pieces
-
Scallop edge cupcake topper to match the wrappers Solid · one piece
-
Cupcake wrapper template to print and cut by hand Outline · 2 pieces
-
Mini cupcake wrapper in two colours Layered · 2 pieces
-
Scalloped cupcake wrapper Solid · one piece
-
Plain cupcake wrapper with a glue tab Solid · one piece
-
Lace cupcake wrapper Solid · one piece
-
Crown cupcake wrapper Solid · one piece
← Tall cupcake wrapper with hearts All 13 cupcake wrappers Cupcake stand tier to match the wrappers →