Mini cupcake wrapper in two colours SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Two pieces for a mini cupcake: a lace wrapper with twelve scallops, and a plain liner 3 mm shorter that is glued into a ring and stood inside it, so its colour shows through the lace. Cut 161 mm wide, the wrapper fits a case 32 mm across the base.
What is in the file
| Size | 100 × 45 mm (3.94 × 1.77 in), scales to any size |
|---|---|
| Pieces | 2 separate pieces |
| Outlines to cut | 47: 2 outer edges and 45 cut-outs |
| Cut length | 1,038 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 213 curve and line segments |
| Layers | 2: liner and wrapper |
Measured from the file. PNG: 2,000 × 940 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.45 in (25 × 11 mm) | Over 1.5 mm | 264 mm | 180 | Vinyl, card and thin sheet |
| 2 × 0.9 in (51 × 23 mm) | Over 3 mm | 527 mm | 55 | Any material, including 3 mm wood and acrylic |
| 3 × 1.35 in (76 × 34 mm) | Over 4.6 mm | 791 mm | 21 | Any material, including 3 mm wood and acrylic |
| 4 × 1.8 in (102 × 46 mm) | Over 6.1 mm | 1,055 mm | 12 | Any material, including 3 mm wood and acrylic |
| 6 × 2.69 in (152 × 68 mm) | Over 9.1 mm | 1,582 mm | 4 | Any material, including 3 mm wood and acrylic |
| 8 × 3.59 in (203 × 91 mm) | Over 12 mm | 2,109 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 5.39 in (305 × 137 mm) | Over 18 mm | 3,164 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More cupcake wrapper SVG files
-
Scalloped cupcake wrapper Solid · one piece -
Plain cupcake wrapper with a glue tab Solid · one piece -
Lace cupcake wrapper Solid · one piece -
Crown cupcake wrapper Solid · one piece -
Cross cupcake wrapper Solid · one piece -
Wave cupcake wrapper Solid · one piece -
Mini cupcake wrapper with stars Solid · one piece -
Tall cupcake wrapper with hearts Solid · one piece
← Cupcake wrapper template to print and cut by hand All 13 cupcake wrappers Scalloped cupcake wrapper →