Cross cupcake wrapper SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Seven round arches with a cross cut under each one, for a christening, a first communion, a confirmation or Easter. Cut 221 mm wide, it wraps a standard case; each cross is 30 mm tall. It closes with a glue tab.
What is in the file
| Size | 100 × 41 mm (3.94 × 1.62 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 20: 1 outer edge and 19 cut-outs |
| Cut length | 668 mm at this size |
| Narrowest part | 3.4 mm at this size |
| Nodes | 176 curve and line segments |
Measured from the file. PNG: 2,000 × 869 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.41 in (25 × 10 mm) | 0.86 mm | 170 mm | 190 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.82 in (51 × 21 mm) | 1.7 mm | 339 mm | 55 | Vinyl, card and thin sheet |
| 3 × 1.24 in (76 × 31 mm) | 2.6 mm | 509 mm | 24 | Vinyl, card and thin sheet |
| 4 × 1.65 in (102 × 42 mm) | 3.5 mm | 679 mm | 12 | Any material, including 3 mm wood and acrylic |
| 6 × 2.47 in (152 × 63 mm) | 5.2 mm | 1,018 mm | 4 | Any material, including 3 mm wood and acrylic |
| 8 × 3.3 in (203 × 84 mm) | 6.9 mm | 1,357 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 4.94 in (305 × 126 mm) | 10 mm | 2,036 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More cupcake wrapper SVG files
-
Wave cupcake wrapper Solid · one piece -
Mini cupcake wrapper with stars Solid · one piece -
Tall cupcake wrapper with hearts Solid · one piece -
Two scalloped cupcake wrappers on one sheet Solid · 2 pieces -
Cupcake stand tier to match the wrappers Solid · 3 pieces -
Scallop edge cupcake topper to match the wrappers Solid · one piece -
Cupcake wrapper template to print and cut by hand Outline · 2 pieces -
Mini cupcake wrapper in two colours Layered · 2 pieces
← Crown cupcake wrapper All 13 cupcake wrappers Wave cupcake wrapper →