Mini cupcake wrapper with stars SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A wrapper for a mini cupcake with nine stars standing along its top and a small star cut under each gap. Cut 152 mm wide, it wraps a case 32 mm across the base and stands 38 mm up its side, opening to 54 mm at the rim. It closes with a glue tab.
What is in the file
| Size | 100 × 48 mm (3.94 × 1.87 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 18: 1 outer edge and 17 cut-outs |
| Cut length | 660 mm at this size |
| Narrowest part | 3.9 mm at this size |
| Nodes | 178 curve and line segments |
Measured from the file. PNG: 2,000 × 990 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.48 in (25 × 12 mm) | 0.99 mm | 168 mm | 180 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.95 in (51 × 24 mm) | 2 mm | 335 mm | 50 | Vinyl, card and thin sheet |
| 3 × 1.42 in (76 × 36 mm) | 3 mm | 503 mm | 21 | Vinyl, card and thin sheet |
| 4 × 1.9 in (102 × 48 mm) | 4 mm | 671 mm | 10 | Any material, including 3 mm wood and acrylic |
| 6 × 2.85 in (152 × 72 mm) | 5.9 mm | 1,006 mm | 4 | Any material, including 3 mm wood and acrylic |
| 8 × 3.8 in (203 × 97 mm) | 7.9 mm | 1,341 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 5.7 in (305 × 145 mm) | 12 mm | 2,012 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More cupcake wrapper SVG files
-
Tall cupcake wrapper with hearts Solid · one piece -
Two scalloped cupcake wrappers on one sheet Solid · 2 pieces -
Cupcake stand tier to match the wrappers Solid · 3 pieces -
Scallop edge cupcake topper to match the wrappers Solid · one piece -
Cupcake wrapper template to print and cut by hand Outline · 2 pieces -
Mini cupcake wrapper in two colours Layered · 2 pieces -
Scalloped cupcake wrapper Solid · one piece -
Plain cupcake wrapper with a glue tab Solid · one piece
← Wave cupcake wrapper All 13 cupcake wrappers Tall cupcake wrapper with hearts →