Scallop edge cupcake topper to match the wrappers SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Two scalloped rounds joined by a fold. Lay a cocktail stick on one, fold the other over it and glue them back to back: the stick stands in the cake and the topper has two good faces. Cut 98 mm tall, each round is 52 mm across.
What is in the file
| Size | 52 × 100 mm (2.04 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 25: 1 outer edge and 24 cut-outs |
| Cut length | 607 mm at this size |
| Narrowest part | 2.4 mm at this size |
| Nodes | 170 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 1,071 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.52 × 1 in (13 × 25 mm) | 0.61 mm | 154 mm | 170 | Fine detail: vinyl and paper only, weed with care |
| 1.03 × 2 in (26 × 51 mm) | 1.2 mm | 308 mm | 45 | Vinyl, card and thin sheet |
| 1.55 × 3 in (39 × 76 mm) | 1.8 mm | 463 mm | 18 | Vinyl, card and thin sheet |
| 2.07 × 4 in (53 × 102 mm) | 2.4 mm | 617 mm | 10 | Vinyl, card and thin sheet |
| 3.1 × 6 in (79 × 152 mm) | 3.7 mm | 925 mm | 3 | Any material, including 3 mm wood and acrylic |
| 4.14 × 8 in (105 × 203 mm) | 4.9 mm | 1,233 mm | 2 | Any material, including 3 mm wood and acrylic |
| 6.2 × 12 in (158 × 305 mm) | 7.3 mm | 1,850 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More cupcake wrapper SVG files
-
Cupcake wrapper template to print and cut by hand Outline · 2 pieces -
Mini cupcake wrapper in two colours Layered · 2 pieces -
Scalloped cupcake wrapper Solid · one piece -
Plain cupcake wrapper with a glue tab Solid · one piece -
Lace cupcake wrapper Solid · one piece -
Crown cupcake wrapper Solid · one piece -
Cross cupcake wrapper Solid · one piece -
Wave cupcake wrapper Solid · one piece
← Cupcake stand tier to match the wrappers All 13 cupcake wrappers Cupcake wrapper template to print and cut by hand →