Lace cupcake wrapper SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A scalloped wrapper pierced like lace: an eyelet in each scallop, a row of teardrops and two rows of dots, so the paper case shows through in its own colour. Cut 229 mm wide for a standard case; the arrow locks through the slit.
What is in the file
| Size | 100 × 41 mm (3.94 × 1.59 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 70: 1 outer edge and 69 cut-outs |
| Cut length | 847 mm at this size |
| Narrowest part | 1.8 mm at this size |
| Nodes | 265 curve and line segments |
Measured from the file. PNG: 2,000 × 856 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.41 in (25 × 10 mm) | 0.46 mm | 215 mm | 200 | Too fine for most machines |
| 2 × 0.81 in (51 × 21 mm) | 0.91 mm | 430 mm | 60 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.21 in (76 × 31 mm) | 1.4 mm | 645 mm | 24 | Vinyl, card and thin sheet |
| 4 × 1.62 in (102 × 41 mm) | 1.8 mm | 861 mm | 12 | Vinyl, card and thin sheet |
| 6 × 2.43 in (152 × 62 mm) | 2.7 mm | 1,291 mm | 4 | Vinyl, card and thin sheet |
| 8 × 3.24 in (203 × 82 mm) | 3.7 mm | 1,721 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 4.86 in (305 × 123 mm) | 5.5 mm | 2,582 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More cupcake wrapper SVG files
-
Crown cupcake wrapper Solid · one piece -
Cross cupcake wrapper Solid · one piece -
Wave cupcake wrapper Solid · one piece -
Mini cupcake wrapper with stars Solid · one piece -
Tall cupcake wrapper with hearts Solid · one piece -
Two scalloped cupcake wrappers on one sheet Solid · 2 pieces -
Cupcake stand tier to match the wrappers Solid · 3 pieces -
Scallop edge cupcake topper to match the wrappers Solid · one piece
← Plain cupcake wrapper with a glue tab All 13 cupcake wrappers Crown cupcake wrapper →