Free cowboy boot SVG

Cowboy boot with a spur SVG

Cowboy boot with a spur, as a solid black shape — Cowboy boot with a spur. The preview is the SVG file itself.

The stitched boot rocked back on its heel, with a spur behind it: a short shank and an eight-point rowel with a hole through the middle.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 92 mm (3.94 × 3.61 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	9: 1 outer edge and 8 cut-outs
Cut length	870 mm at this size
Narrowest part	1.5 mm at this size
Nodes	169 curve and line segments

Measured from the file. PNG: 2,000 × 1,842 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.92 in (25 × 23 mm)	0.38 mm	221 mm	100	Too fine for most machines
2 × 1.84 in (51 × 47 mm)	0.76 mm	442 mm	25	Fine detail: vinyl and paper only, weed with care
3 × 2.75 in (76 × 70 mm)	1.1 mm	663 mm	12	Vinyl, card and thin sheet
4 × 3.67 in (102 × 93 mm)	1.5 mm	884 mm	6	Vinyl, card and thin sheet
6 × 5.51 in (152 × 140 mm)	2.3 mm	1,326 mm	2	Vinyl, card and thin sheet
8 × 7.34 in (203 × 187 mm)	3 mm	1,768 mm	1	Any material, including 3 mm wood and acrylic
12 × 11.02 in (305 × 280 mm)	4.6 mm	2,652 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More cowboy boot SVG files

← Cowboy boot with flowers All 13 cowboy boots Cowboy boot with a hat →