Free cowboy boot SVG

Cowboy boot with a hat SVG

Cowboy boot with a hat, as a solid black shape — Cowboy boot with a hat. The preview is the SVG file itself.

A stitched boot with a cowboy hat hung on top of the shaft at an angle. A slot marks the edge of the hat where it crosses the boot, and the two stay one piece.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	87 × 100 mm (3.42 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	10: 1 outer edge and 9 cut-outs
Cut length	742 mm at this size
Narrowest part	1.9 mm at this size
Nodes	134 curve and line segments

Measured from the file. PNG: 1,746 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.87 × 1 in (22 × 25 mm)	0.48 mm	188 mm	110	Too fine for most machines
1.74 × 2 in (44 × 51 mm)	0.97 mm	377 mm	30	Fine detail: vinyl and paper only, weed with care
2.6 × 3 in (66 × 76 mm)	1.4 mm	565 mm	12	Vinyl, card and thin sheet
3.47 × 4 in (88 × 102 mm)	1.9 mm	754 mm	6	Vinyl, card and thin sheet
5.21 × 6 in (132 × 152 mm)	2.9 mm	1,131 mm	2	Vinyl, card and thin sheet
6.94 × 8 in (176 × 203 mm)	3.9 mm	1,508 mm	1	Any material, including 3 mm wood and acrylic
10.42 × 12 in (265 × 305 mm)	5.8 mm	2,262 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More cowboy boot SVG files

← Cowboy boot with a spur All 13 cowboy boots Western boot with a star →