Free cowboy boot SVG

Classic cowboy boot SVG

Classic cowboy boot, as a solid black shape — Classic cowboy boot. The preview is the SVG file itself.

A western boot in profile with a pointed toe, a slanted heel and a scalloped top. Flame stitching on the shaft, the seam over the instep, the welt and the heel stack are cut as fine slots.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	93 × 100 mm (3.65 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	8: 1 outer edge and 7 cut-outs
Cut length	902 mm at this size
Narrowest part	2.3 mm at this size
Nodes	160 curve and line segments

Measured from the file. PNG: 1,860 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.93 × 1 in (24 × 25 mm)	0.58 mm	229 mm	100	Fine detail: vinyl and paper only, weed with care
1.85 × 2 in (47 × 51 mm)	1.2 mm	458 mm	25	Vinyl, card and thin sheet
2.78 × 3 in (71 × 76 mm)	1.8 mm	687 mm	12	Vinyl, card and thin sheet
3.71 × 4 in (94 × 102 mm)	2.3 mm	916 mm	6	Vinyl, card and thin sheet
5.56 × 6 in (141 × 152 mm)	3.5 mm	1,375 mm	2	Any material, including 3 mm wood and acrylic
7.42 × 8 in (188 × 203 mm)	4.7 mm	1,833 mm	1	Any material, including 3 mm wood and acrylic
11.12 × 12 in (283 × 305 mm)	7 mm	2,749 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More cowboy boot SVG files

← Layered little cowboy boot All 13 cowboy boots Cowboy boot silhouette →