Free cowboy boot SVG

Cowgirl boot with a daisy SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Cowgirl boot with a daisy, as a solid black shape
Cowgirl boot with a daisy. The preview is the SVG file itself.

A slim boot with a high heel and a deeply scalloped top, with a daisy and two small hearts cut out of the shaft. For bridal parties, birthdays and country concerts.

What is in the file

Size87 × 100 mm (3.41 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut16: 1 outer edge and 15 cut-outs
Cut length855 mm at this size
Narrowest part1.8 mm at this size
Nodes164 curve and line segments

Measured from the file. PNG: 1,744 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.87 × 1 in (22 × 25 mm)0.46 mm217 mm110Too fine for most machines
1.73 × 2 in (44 × 51 mm)0.91 mm434 mm30Fine detail: vinyl and paper only, weed with care
2.6 × 3 in (66 × 76 mm)1.4 mm652 mm12Vinyl, card and thin sheet
3.47 × 4 in (88 × 102 mm)1.8 mm869 mm6Vinyl, card and thin sheet
5.2 × 6 in (132 × 152 mm)2.7 mm1,303 mm2Vinyl, card and thin sheet
6.94 × 8 in (176 × 203 mm)3.7 mm1,737 mm1Any material, including 3 mm wood and acrylic
10.4 × 12 in (264 × 305 mm)5.5 mm2,606 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More cowboy boot SVG files

← Pair of cowboy boots All 13 cowboy boots Cowboy boot with flowers →