Free cowboy boot SVG

Cowboy boot prints SVG

Cowboy boot prints, as a solid black shape — Cowboy boot prints. The preview is the SVG file itself.

The prints a pair of boots leaves in the dust: a pointed sole and a separate heel for each foot, side by side. Four loose pieces by design, for trails across a wall or a party table.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	69 × 100 mm (2.71 × 3.94 in), scales to any size
Pieces	4 separate pieces
Outlines to cut	4 outlines
Cut length	488 mm at this size
Narrowest part	Nothing narrower than 6 mm at this size
Nodes	48 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 1,400 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.69 × 1 in (17 × 25 mm)	Over 1.5 mm	124 mm	130	Vinyl, card and thin sheet
1.38 × 2 in (35 × 51 mm)	Over 3 mm	248 mm	35	Any material, including 3 mm wood and acrylic
2.06 × 3 in (52 × 76 mm)	Over 4.6 mm	372 mm	15	Any material, including 3 mm wood and acrylic
2.75 × 4 in (70 × 102 mm)	Over 6.1 mm	496 mm	8	Any material, including 3 mm wood and acrylic
4.13 × 6 in (105 × 152 mm)	Over 9.1 mm	744 mm	2	Any material, including 3 mm wood and acrylic
5.5 × 8 in (140 × 203 mm)	Over 12 mm	992 mm	2	Any material, including 3 mm wood and acrylic
8.26 × 12 in (210 × 305 mm)	Over 18 mm	1,487 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More cowboy boot SVG files

← Cow print cowboy boot All 13 cowboy boots Layered little cowboy boot →