Free cowboy boot SVG

Cowboy boot silhouette SVG

Cowboy boot silhouette, as a solid black shape — Cowboy boot silhouette. The preview is the SVG file itself.

A tall boot as a plain solid shape with nothing cut out of it, facing right: high scalloped shaft, pointed toe and a tall slanted heel. Quick to cut and clear when small.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	80 × 100 mm (3.15 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	1 outline
Cut length	348 mm at this size
Narrowest part	Nothing narrower than 6 mm at this size
Nodes	50 curve and line segments

Measured from the file. PNG: 1,613 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.8 × 1 in (20 × 25 mm)	Over 1.5 mm	88 mm	120	Vinyl, card and thin sheet
1.6 × 2 in (41 × 51 mm)	Over 3 mm	177 mm	30	Any material, including 3 mm wood and acrylic
2.4 × 3 in (61 × 76 mm)	Over 4.6 mm	265 mm	12	Any material, including 3 mm wood and acrylic
3.2 × 4 in (81 × 102 mm)	Over 6.1 mm	354 mm	6	Any material, including 3 mm wood and acrylic
4.79 × 6 in (122 × 152 mm)	Over 9.1 mm	530 mm	2	Any material, including 3 mm wood and acrylic
6.39 × 8 in (162 × 203 mm)	Over 12 mm	707 mm	1	Any material, including 3 mm wood and acrylic
9.59 × 12 in (244 × 305 mm)	Over 18 mm	1,061 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More cowboy boot SVG files

← Classic cowboy boot All 13 cowboy boots Cowboy boot outline →