Free cowboy boot SVG

Pair of cowboy boots SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Pair of cowboy boots, as a solid black shape
Pair of cowboy boots. The preview is the SVG file itself.

Two stitched boots, one standing a little behind and above the other, with a slim gap where the front boot overlaps the back one. Separate pieces by design.

What is in the file

Size94 × 100 mm (3.71 × 3.94 in), scales to any size
Pieces4 separate pieces
Outlines to cut12: 4 outer edges and 8 cut-outs
Cut length1,160 mm at this size
Narrowest part1.2 mm at this size
Nodes258 curve and line segments

Measured from the file. PNG: 1,888 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.94 × 1 in (24 × 25 mm)0.3 mm295 mm100Too fine for most machines
1.88 × 2 in (48 × 51 mm)0.61 mm589 mm25Fine detail: vinyl and paper only, weed with care
2.83 × 3 in (72 × 76 mm)0.91 mm884 mm12Fine detail: vinyl and paper only, weed with care
3.77 × 4 in (96 × 102 mm)1.2 mm1,179 mm6Vinyl, card and thin sheet
5.65 × 6 in (144 × 152 mm)1.8 mm1,768 mm2Vinyl, card and thin sheet
7.54 × 8 in (191 × 203 mm)2.4 mm2,357 mm1Vinyl, card and thin sheet
11.3 × 12 in (287 × 305 mm)3.7 mm3,536 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More cowboy boot SVG files

← Cowboy boot outline All 13 cowboy boots Cowgirl boot with a daisy →