Free cowboy boot SVG

Cowboy boot with flowers SVG

Cowboy boot with flowers, as a solid black shape — Cowboy boot with flowers. The preview is the SVG file itself.

A boot used as a vase: a large daisy, a tulip and a small daisy stand in the top on curved stems, with two leaves. All welded into one piece, for spring signs and Mother’s Day.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	69 × 100 mm (2.7 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	8: 1 outer edge and 7 cut-outs
Cut length	734 mm at this size
Narrowest part	1.4 mm at this size
Nodes	162 curve and line segments

Measured from the file. PNG: 1,398 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.69 × 1 in (17 × 25 mm)	0.36 mm	186 mm	130	Too fine for most machines
1.37 × 2 in (35 × 51 mm)	0.71 mm	373 mm	35	Fine detail: vinyl and paper only, weed with care
2.06 × 3 in (52 × 76 mm)	1.1 mm	559 mm	15	Vinyl, card and thin sheet
2.75 × 4 in (70 × 102 mm)	1.4 mm	746 mm	8	Vinyl, card and thin sheet
4.12 × 6 in (105 × 152 mm)	2.1 mm	1,119 mm	2	Vinyl, card and thin sheet
5.5 × 8 in (140 × 203 mm)	2.8 mm	1,491 mm	2	Vinyl, card and thin sheet
8.24 × 12 in (209 × 305 mm)	4.3 mm	2,237 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More cowboy boot SVG files

← Cowgirl boot with a daisy All 13 cowboy boots Cowboy boot with a spur →