Free cowboy boot SVG

Layered little cowboy boot SVG

Layered little cowboy boot, in layered colours
Layered little cowboy boot. The preview is the SVG file itself.

A short, round-toed child’s boot in three layers: the tan boot, a dark sole and heel, and a pale star with a trim along the scalloped top.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 91 mm (3.94 × 3.57 in), scales to any size
Pieces7 separate pieces
Outlines to cut7 outlines
Cut length886 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes138 curve and line segments
Layers3: boot, sole and heel and trim

Measured from the file. PNG: 2,000 × 1,821 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.91 in (25 × 23 mm)Over 1.5 mm225 mm110Vinyl, card and thin sheet
2 × 1.81 in (51 × 46 mm)Over 3 mm450 mm30Any material, including 3 mm wood and acrylic
3 × 2.72 in (76 × 69 mm)Over 4.6 mm675 mm12Any material, including 3 mm wood and acrylic
4 × 3.63 in (102 × 92 mm)Over 6.1 mm900 mm6Any material, including 3 mm wood and acrylic
6 × 5.44 in (152 × 138 mm)Over 9.1 mm1,350 mm2Any material, including 3 mm wood and acrylic
8 × 7.26 in (203 × 184 mm)Over 12 mm1,800 mm1Any material, including 3 mm wood and acrylic
12 × 10.88 in (305 × 276 mm)Over 18 mm2,701 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More cowboy boot SVG files

← Cowboy boot prints All 13 cowboy boots Classic cowboy boot →