Free cowboy boot SVG

Cow print cowboy boot SVG

Cow print cowboy boot, as a solid black shape — Cow print cowboy boot. The preview is the SVG file itself.

The classic boot covered in cow patches: uneven blobs, large and small, trimmed to leave a solid rim round the edge. Put white, pink or tan behind the holes.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	93 × 100 mm (3.65 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	16: 1 outer edge and 15 cut-outs
Cut length	830 mm at this size
Narrowest part	2.5 mm at this size
Nodes	219 curve and line segments

Measured from the file. PNG: 1,860 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.93 × 1 in (24 × 25 mm)	0.64 mm	211 mm	100	Fine detail: vinyl and paper only, weed with care
1.85 × 2 in (47 × 51 mm)	1.3 mm	422 mm	25	Vinyl, card and thin sheet
2.78 × 3 in (71 × 76 mm)	1.9 mm	632 mm	12	Vinyl, card and thin sheet
3.71 × 4 in (94 × 102 mm)	2.5 mm	843 mm	6	Vinyl, card and thin sheet
5.56 × 6 in (141 × 152 mm)	3.8 mm	1,265 mm	2	Any material, including 3 mm wood and acrylic
7.42 × 8 in (188 × 203 mm)	5.1 mm	1,687 mm	1	Any material, including 3 mm wood and acrylic
11.12 × 12 in (283 × 305 mm)	7.6 mm	2,530 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More cowboy boot SVG files

← Cowboy boot monogram frame All 13 cowboy boots Cowboy boot prints →