Free cowboy boot SVG

Western boot with a star SVG

Western boot with a star. The preview is the SVG file itself.

A square-toed roper boot with a low heel and a wide shaft, with a five-point star cut out of the shaft and the welt, heel and instep seam marked.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	98 × 100 mm (3.85 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	7: 1 outer edge and 6 cut-outs
Cut length	838 mm at this size
Narrowest part	2.5 mm at this size
Nodes	116 curve and line segments

Measured from the file. PNG: 1,958 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.98 × 1 in (25 × 25 mm)	0.64 mm	213 mm	100	Fine detail: vinyl and paper only, weed with care
1.96 × 2 in (50 × 51 mm)	1.3 mm	426 mm	25	Vinyl, card and thin sheet
2.93 × 3 in (75 × 76 mm)	1.9 mm	639 mm	9	Vinyl, card and thin sheet
3.91 × 4 in (99 × 102 mm)	2.5 mm	851 mm	4	Vinyl, card and thin sheet
5.87 × 6 in (149 × 152 mm)	3.8 mm	1,277 mm	2	Any material, including 3 mm wood and acrylic
7.82 × 8 in (199 × 203 mm)	5.1 mm	1,703 mm	1	Any material, including 3 mm wood and acrylic
11.74 × 12 in (298 × 305 mm)	7.6 mm	2,554 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More cowboy boot SVG files

← Cowboy boot with a hat All 13 cowboy boots Cowboy boot monogram frame →