Free Congrats SVG

Congrats in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Congrats in Alfa Slab One, as a solid black shape
Congrats in Alfa Slab One. The preview is the SVG file itself.

“Congrats” set in Alfa Slab One, a very heavy slab serif. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 22 mm (3.94 × 0.85 in), scales to any size
Pieces8 separate pieces
Outlines to cut11: 8 outer edges and 3 cut-outs
Cut length509 mm at this size
Narrowest part2.1 mm at this size
Nodes158 curve and line segments

Measured from the file. PNG: 2,000 × 490 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.22 in (25 × 5 mm)0.53 mm129 mm290Fine detail: vinyl and paper only, weed with care
2 × 0.43 in (51 × 11 mm)1.1 mm259 mm95Vinyl, card and thin sheet
3 × 0.65 in (76 × 16 mm)1.6 mm388 mm42Vinyl, card and thin sheet
4 × 0.86 in (102 × 22 mm)2.1 mm517 mm22Vinyl, card and thin sheet
6 × 1.29 in (152 × 33 mm)3.2 mm776 mm8Any material, including 3 mm wood and acrylic
8 × 1.72 in (203 × 44 mm)4.3 mm1,034 mm6Any material, including 3 mm wood and acrylic
12 × 2.58 in (305 × 66 mm)6.4 mm1,551 mm4Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Congrats SVG files

← Congrats in Lilita One All 13 Congrats designs Congrats in Amatic SC →