Free Congrats SVG

Congrats with a star SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Congrats with a star. The preview is the SVG file itself.

“Congrats” with a star above the words, which are set in Lobster. The picture is a separate piece, so it can be cut in a second colour or left off.

What is in the file

Size	100 × 76 mm (3.94 × 3.01 in), scales to any size
Pieces	3 separate pieces
Outlines to cut	8: 3 outer edges and 5 cut-outs
Cut length	739 mm at this size
Narrowest part	1.1 mm at this size
Nodes	202 curve and line segments

Measured from the file. PNG: 2,000 × 1,546 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.76 in (25 × 19 mm)	0.28 mm	188 mm	120	Too fine for most machines
2 × 1.53 in (51 × 39 mm)	0.56 mm	375 mm	35	Fine detail: vinyl and paper only, weed with care
3 × 2.29 in (76 × 58 mm)	0.84 mm	563 mm	12	Fine detail: vinyl and paper only, weed with care
4 × 3.06 in (102 × 78 mm)	1.1 mm	751 mm	6	Vinyl, card and thin sheet
6 × 4.58 in (152 × 116 mm)	1.7 mm	1,126 mm	2	Vinyl, card and thin sheet
8 × 6.11 in (203 × 155 mm)	2.2 mm	1,502 mm	1	Vinyl, card and thin sheet
12 × 9.17 in (305 × 233 mm)	3.4 mm	2,252 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Congrats SVG files

← Congrats with a drop shadow All 13 Congrats designs Congrats in Pacifico →