Free Congrats SVG

Congrats in block capitals SVG

Congrats in block capitals, as a solid black shape — Congrats in block capitals. The preview is the SVG file itself.

“CONGRATS” in the tall, narrow capitals of Bebas Neue. Each letter is a separate piece with thick, even strokes.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 24 mm (3.94 × 0.93 in), scales to any size
Pieces	8 separate pieces
Outlines to cut	11: 8 outer edges and 3 cut-outs
Cut length	781 mm at this size
Narrowest part	2.8 mm at this size
Nodes	143 curve and line segments

Measured from the file. PNG: 2,000 × 533 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.24 in (25 × 6 mm)	0.71 mm	198 mm	270	Fine detail: vinyl and paper only, weed with care
2 × 0.47 in (51 × 12 mm)	1.4 mm	397 mm	90	Vinyl, card and thin sheet
3 × 0.71 in (76 × 18 mm)	2.1 mm	595 mm	39	Vinyl, card and thin sheet
4 × 0.95 in (102 × 24 mm)	2.8 mm	793 mm	20	Vinyl, card and thin sheet
6 × 1.42 in (152 × 36 mm)	4.3 mm	1,190 mm	7	Any material, including 3 mm wood and acrylic
8 × 1.9 in (203 × 48 mm)	5.7 mm	1,587 mm	5	Any material, including 3 mm wood and acrylic
12 × 2.84 in (305 × 72 mm)	8.5 mm	2,380 mm	4	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Congrats SVG files

← Congrats in Amatic SC All 12 Congrats designs Congrats with a swash underline →