Free Congrats SVG

Congrats with stars SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Congrats with stars, as a solid black shape
Congrats with stars. The preview is the SVG file itself.

“Congrats” in Lobster with a row of three stars above the words and three below, the middle one larger. The stars are loose pieces, spaced to the width of the lettering.

What is in the file

Size100 × 61 mm (3.94 × 2.39 in), scales to any size
Pieces8 separate pieces
Outlines to cut13: 8 outer edges and 5 cut-outs
Cut length823 mm at this size
Narrowest part1.1 mm at this size
Nodes248 curve and line segments

Measured from the file. PNG: 2,000 × 1,242 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.61 in (25 × 15 mm)0.28 mm209 mm150Too fine for most machines
2 × 1.21 in (51 × 31 mm)0.56 mm418 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.82 in (76 × 46 mm)0.84 mm627 mm18Fine detail: vinyl and paper only, weed with care
4 × 2.42 in (102 × 62 mm)1.1 mm836 mm8Vinyl, card and thin sheet
6 × 3.64 in (152 × 92 mm)1.7 mm1,254 mm3Vinyl, card and thin sheet
8 × 4.85 in (203 × 123 mm)2.2 mm1,672 mm2Vinyl, card and thin sheet
12 × 7.27 in (305 × 185 mm)3.4 mm2,509 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Congrats SVG files

← Congrats with a swash underline All 13 Congrats designs Congrats outline lettering →