Free Congrats SVG

Congrats stencil plate SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Congrats stencil plate, as a solid black shape
Congrats stencil plate. The preview is the SVG file itself.

A rounded plate with “CONGRATS” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

What is in the file

Size100 × 33 mm (3.94 × 1.28 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut9: 1 outer edge and 8 cut-outs
Cut length781 mm at this size
Narrowest part1.4 mm at this size
Nodes194 curve and line segments

Measured from the file. PNG: 2,000 × 702 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.33 in (25 × 8 mm)0.36 mm198 mm230Too fine for most machines
2 × 0.65 in (51 × 17 mm)0.71 mm397 mm70Fine detail: vinyl and paper only, weed with care
3 × 0.98 in (76 × 25 mm)1.1 mm595 mm30Vinyl, card and thin sheet
4 × 1.3 in (102 × 33 mm)1.4 mm793 mm16Vinyl, card and thin sheet
6 × 1.95 in (152 × 50 mm)2.1 mm1,190 mm5Vinyl, card and thin sheet
8 × 2.6 in (203 × 66 mm)2.8 mm1,587 mm4Vinyl, card and thin sheet
12 × 3.9 in (305 × 99 mm)4.3 mm2,380 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Congrats SVG files

← Congrats outline lettering All 13 Congrats designs Congrats with a drop shadow →