Congrats in Amatic SC SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Congrats” set in Amatic SC, narrow hand-drawn capitals. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.
What is in the file
| Size | 100 × 31 mm (3.94 × 1.24 in), scales to any size |
|---|---|
| Pieces | 8 separate pieces |
| Outlines to cut | 11: 8 outer edges and 3 cut-outs |
| Cut length | 861 mm at this size |
| Narrowest part | 1.8 mm at this size |
| Nodes | 273 curve and line segments |
Measured from the file. PNG: 2,000 × 681 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.31 in (25 × 8 mm) | 0.46 mm | 219 mm | 230 | Too fine for most machines |
| 2 × 0.63 in (51 × 16 mm) | 0.91 mm | 437 mm | 70 | Fine detail: vinyl and paper only, weed with care |
| 3 × 0.94 in (76 × 24 mm) | 1.4 mm | 656 mm | 30 | Vinyl, card and thin sheet |
| 4 × 1.26 in (102 × 32 mm) | 1.8 mm | 875 mm | 16 | Vinyl, card and thin sheet |
| 6 × 1.88 in (152 × 48 mm) | 2.7 mm | 1,312 mm | 5 | Vinyl, card and thin sheet |
| 8 × 2.51 in (203 × 64 mm) | 3.7 mm | 1,750 mm | 4 | Any material, including 3 mm wood and acrylic |
| 12 × 3.77 in (305 × 96 mm) | 5.5 mm | 2,624 mm | 3 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Congrats SVG files
-
Congrats in block capitals Solid · 8 pieces
-
Congrats with a swash underline Solid · 2 pieces
-
Congrats with stars Solid · 8 pieces
-
Congrats outline lettering Outline · 10 pieces
-
Congrats stencil plate Solid · one piece
-
Congrats with a drop shadow Layered · 2 pieces
-
Congrats with a star Solid · 3 pieces
-
Congrats in Pacifico Solid · one piece
← Congrats in Alfa Slab One All 13 Congrats designs Congrats in block capitals →