Free Congrats SVG

Congrats outline lettering SVG

Congrats outline lettering, drawn as a line — Congrats outline lettering. The preview is the SVG file itself.

“Congrats” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 22 mm (3.94 × 0.87 in), scales to any size
Pieces	10 separate pieces
Outlines to cut	23: 10 outer edges and 13 cut-outs
Cut length	788 mm at this size
Narrowest part	1.4 mm at this size
Nodes	259 curve and line segments

Measured from the file. PNG: 2,000 × 500 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.22 in (25 × 6 mm)	0.36 mm	200 mm	290	Too fine for most machines
2 × 0.44 in (51 × 11 mm)	0.71 mm	400 mm	95	Fine detail: vinyl and paper only, weed with care
3 × 0.66 in (76 × 17 mm)	1.1 mm	600 mm	42	Vinyl, card and thin sheet
4 × 0.88 in (102 × 22 mm)	1.4 mm	801 mm	22	Vinyl, card and thin sheet
6 × 1.32 in (152 × 34 mm)	2.1 mm	1,201 mm	8	Vinyl, card and thin sheet
8 × 1.76 in (203 × 45 mm)	2.8 mm	1,601 mm	6	Vinyl, card and thin sheet
12 × 2.64 in (305 × 67 mm)	4.3 mm	2,402 mm	4	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Congrats SVG files

← Congrats with stars All 12 Congrats designs Congrats stencil plate →