Congrats in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Congrats” set in Lilita One, a chunky rounded sans. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 24 mm (3.94 × 0.93 in), scales to any size |
|---|---|
| Pieces | 8 separate pieces |
| Outlines to cut | 11: 8 outer edges and 3 cut-outs |
| Cut length | 474 mm at this size |
| Narrowest part | 2.7 mm at this size |
| Nodes | 148 curve and line segments |
Measured from the file. PNG: 2,000 × 531 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.24 in (25 × 6 mm) | 0.69 mm | 120 mm | 270 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.47 in (51 × 12 mm) | 1.4 mm | 241 mm | 90 | Vinyl, card and thin sheet |
| 3 × 0.71 in (76 × 18 mm) | 2.1 mm | 361 mm | 39 | Vinyl, card and thin sheet |
| 4 × 0.94 in (102 × 24 mm) | 2.7 mm | 482 mm | 20 | Vinyl, card and thin sheet |
| 6 × 1.42 in (152 × 36 mm) | 4.1 mm | 722 mm | 7 | Any material, including 3 mm wood and acrylic |
| 8 × 1.89 in (203 × 48 mm) | 5.5 mm | 963 mm | 5 | Any material, including 3 mm wood and acrylic |
| 12 × 2.83 in (305 × 72 mm) | 8.2 mm | 1,445 mm | 4 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Congrats SVG files
-
Congrats in Alfa Slab One Solid · 8 pieces
-
Congrats in Amatic SC Solid · 8 pieces
-
Congrats in block capitals Solid · 8 pieces
-
Congrats with a swash underline Solid · 2 pieces
-
Congrats with stars Solid · 8 pieces
-
Congrats outline lettering Outline · 10 pieces
-
Congrats stencil plate Solid · one piece
-
Congrats with a drop shadow Layered · 2 pieces
← Congrats in Kaushan Script All 13 Congrats designs Congrats in Alfa Slab One →