Free Congrats SVG

Congrats with a drop shadow SVG

Congrats with a drop shadow, in layered colours — Congrats with a drop shadow. The preview is the SVG file itself.

“Congrats” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 36 mm (3.94 × 1.42 in), scales to any size
Pieces	2 separate pieces
Outlines to cut	10: 2 outer edges and 8 cut-outs
Cut length	925 mm at this size
Narrowest part	4.6 mm at this size
Nodes	362 curve and line segments
Layers	2: shadow and words

Measured from the file. PNG: 2,000 × 769 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.36 in (25 × 9 mm)	1.2 mm	235 mm	210	Vinyl, card and thin sheet
2 × 0.72 in (51 × 18 mm)	2.3 mm	470 mm	65	Vinyl, card and thin sheet
3 × 1.08 in (76 × 27 mm)	3.5 mm	705 mm	27	Any material, including 3 mm wood and acrylic
4 × 1.44 in (102 × 37 mm)	4.7 mm	940 mm	14	Any material, including 3 mm wood and acrylic
6 × 2.16 in (152 × 55 mm)	7 mm	1,410 mm	5	Any material, including 3 mm wood and acrylic
8 × 2.88 in (203 × 73 mm)	9.3 mm	1,880 mm	3	Any material, including 3 mm wood and acrylic
12 × 4.32 in (305 × 110 mm)	14 mm	2,819 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Congrats SVG files

← Congrats stencil plate All 12 Congrats designs Congrats in Pacifico →