Congrats with a swash underline SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Congrats” in Pacifico script with a tapering swash swept underneath it, welded to the word where a letter dips down to meet it, or sitting just below it where none does.
What is in the file
| Size | 100 × 41 mm (3.94 × 1.59 in), scales to any size |
|---|---|
| Pieces | 2 separate pieces |
| Outlines to cut | 7: 2 outer edges and 5 cut-outs |
| Cut length | 758 mm at this size |
| Narrowest part | 1.6 mm at this size |
| Nodes | 233 curve and line segments |
Measured from the file. PNG: 2,000 × 856 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.41 in (25 × 10 mm) | 0.41 mm | 193 mm | 200 | Too fine for most machines |
| 2 × 0.81 in (51 × 21 mm) | 0.81 mm | 385 mm | 60 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.21 in (76 × 31 mm) | 1.2 mm | 578 mm | 24 | Vinyl, card and thin sheet |
| 4 × 1.62 in (102 × 41 mm) | 1.6 mm | 770 mm | 12 | Vinyl, card and thin sheet |
| 6 × 2.43 in (152 × 62 mm) | 2.4 mm | 1,155 mm | 4 | Vinyl, card and thin sheet |
| 8 × 3.24 in (203 × 82 mm) | 3.3 mm | 1,540 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 4.86 in (305 × 123 mm) | 4.9 mm | 2,310 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Congrats SVG files
-
Congrats with stars Solid · 8 pieces
-
Congrats outline lettering Outline · 10 pieces
-
Congrats stencil plate Solid · one piece
-
Congrats with a drop shadow Layered · 2 pieces
-
Congrats with a star Solid · 3 pieces
-
Congrats in Pacifico Solid · one piece
-
Congrats in Lobster Solid · 2 pieces
-
Congrats in Kaushan Script Solid · 7 pieces
← Congrats in block capitals All 13 Congrats designs Congrats with stars →