Free bunny SVG

Split bunny for a name SVG

Split bunny for a name, as a solid black shape — Split bunny for a name. The preview is the SVG file itself.

The bunny head cut in two with a clear band across the middle for a name. It comes as two pieces: the ears and brow above, the cheeks and chin below.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	57 × 100 mm (2.26 × 3.94 in), scales to any size
Pieces	2 separate pieces
Outlines to cut	4: 2 outer edges and 2 cut-outs
Cut length	637 mm at this size
Narrowest part	4.8 mm at this size
Nodes	81 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 1,179 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.57 × 1 in (15 × 25 mm)	1.2 mm	162 mm	150	Vinyl, card and thin sheet
1.15 × 2 in (29 × 51 mm)	2.4 mm	324 mm	45	Vinyl, card and thin sheet
1.72 × 3 in (44 × 76 mm)	3.7 mm	485 mm	18	Any material, including 3 mm wood and acrylic
2.29 × 4 in (58 × 102 mm)	4.9 mm	647 mm	8	Any material, including 3 mm wood and acrylic
3.44 × 6 in (87 × 152 mm)	7.3 mm	971 mm	3	Any material, including 3 mm wood and acrylic
4.58 × 8 in (116 × 203 mm)	9.8 mm	1,294 mm	2	Any material, including 3 mm wood and acrylic
6.88 × 12 in (175 × 305 mm)	15 mm	1,942 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bunny SVG files

← Bunny monogram frame All 19 bunnies Easter bunny face with a bow tie →