Peeking bunny SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The top of a bunny face looking over a ledge, ears up and two paws hooked over the edge. For the rim of a basket, a card or a window.
What is in the file
| Size | 100 × 93 mm (3.94 × 3.64 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 12: 1 outer edge and 11 cut-outs |
| Cut length | 826 mm at this size |
| Narrowest part | 1.3 mm at this size |
| Nodes | 137 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,856 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.93 in (25 × 23 mm) | 0.33 mm | 210 mm | 100 | Too fine for most machines |
| 2 × 1.85 in (51 × 47 mm) | 0.66 mm | 420 mm | 25 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.77 in (76 × 70 mm) | 0.99 mm | 629 mm | 12 | Fine detail: vinyl and paper only, weed with care |
| 4 × 3.7 in (102 × 94 mm) | 1.3 mm | 839 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.55 in (152 × 141 mm) | 2 mm | 1,259 mm | 2 | Vinyl, card and thin sheet |
| 8 × 7.4 in (203 × 188 mm) | 2.6 mm | 1,678 mm | 1 | Vinyl, card and thin sheet |
| 12 × 11.1 in (305 × 282 mm) | 4 mm | 2,518 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.