Free bunny SVG

Bunny nose and whiskers SVG

Bunny nose and whiskers, as a solid black shape — Bunny nose and whiskers. The preview is the SVG file itself.

A small nose, a mouth with two front teeth and six whiskers, as loose pieces set out in place. For Easter masks, mugs, eggs and plain party cups.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 34 mm (3.94 × 1.32 in), scales to any size
Pieces	7 separate pieces
Outlines to cut	7 outlines
Cut length	517 mm at this size
Narrowest part	2.5 mm at this size
Nodes	278 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 723 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.34 in (25 × 9 mm)	0.64 mm	131 mm	220	Fine detail: vinyl and paper only, weed with care
2 × 0.67 in (51 × 17 mm)	1.3 mm	263 mm	65	Vinyl, card and thin sheet
3 × 1.01 in (76 × 26 mm)	1.9 mm	394 mm	30	Vinyl, card and thin sheet
4 × 1.34 in (102 × 34 mm)	2.5 mm	525 mm	14	Vinyl, card and thin sheet
6 × 2.02 in (152 × 51 mm)	3.8 mm	788 mm	5	Any material, including 3 mm wood and acrylic
8 × 2.69 in (203 × 68 mm)	5.1 mm	1,051 mm	4	Any material, including 3 mm wood and acrylic
12 × 4.03 in (305 × 102 mm)	7.6 mm	1,576 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bunny SVG files

← Bunny feet All 19 bunnies Cute bunny sitting →