Free bunny SVG

Bunny ears with one bent SVG

Bunny ears with one bent, as a solid black shape — Bunny ears with one bent. The preview is the SVG file itself.

A pair of ears with the left one folded over halfway up, as if listening. The folded tip hangs clear of the ear, and both centres are cut out.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 98 mm (3.94 × 3.85 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	3: 1 outer edge and 2 cut-outs
Cut length	623 mm at this size
Narrowest part	Nothing narrower than 6 mm at this size
Nodes	88 curve and line segments

Measured from the file. PNG: 2,000 × 1,960 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.98 in (25 × 25 mm)	Over 1.5 mm	158 mm	100	Vinyl, card and thin sheet
2 × 1.96 in (51 × 50 mm)	Over 3 mm	316 mm	25	Any material, including 3 mm wood and acrylic
3 × 2.94 in (76 × 75 mm)	Over 4.6 mm	475 mm	9	Any material, including 3 mm wood and acrylic
4 × 3.92 in (102 × 99 mm)	Over 6.1 mm	633 mm	4	Any material, including 3 mm wood and acrylic
6 × 5.87 in (152 × 149 mm)	Over 9.1 mm	949 mm	2	Any material, including 3 mm wood and acrylic
8 × 7.83 in (203 × 199 mm)	Over 12 mm	1,266 mm	1	Any material, including 3 mm wood and acrylic
12 × 11.75 in (305 × 298 mm)	Over 18 mm	1,899 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bunny SVG files

← Bunny ears All 19 bunnies Bunny butt →