Free bunny SVG

Easter bunny face with a bow tie SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Easter bunny face with a bow tie, as a solid black shape
Easter bunny face with a bow tie. The preview is the SVG file itself.

The bunny face dressed for Easter with a bow tie under its chin. The bow is part of the same piece, with slits to mark the knot and the chin.

What is in the file

Size52 × 100 mm (2.04 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut10: 1 outer edge and 9 cut-outs
Cut length766 mm at this size
Narrowest part1.6 mm at this size
Nodes189 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,075 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.52 × 1 in (13 × 25 mm)0.41 mm195 mm160Too fine for most machines
1.04 × 2 in (26 × 51 mm)0.81 mm389 mm45Fine detail: vinyl and paper only, weed with care
1.56 × 3 in (40 × 76 mm)1.2 mm584 mm18Vinyl, card and thin sheet
2.08 × 4 in (53 × 102 mm)1.6 mm778 mm10Vinyl, card and thin sheet
3.11 × 6 in (79 × 152 mm)2.4 mm1,167 mm3Vinyl, card and thin sheet
4.15 × 8 in (105 × 203 mm)3.3 mm1,557 mm2Any material, including 3 mm wood and acrylic
6.23 × 12 in (158 × 305 mm)4.9 mm2,335 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bunny SVG files

← Split bunny for a name All 19 bunnies Floppy ear bunny →