Free bunny SVG

Bunny feet SVG

Bunny feet, as a solid black shape — Bunny feet. The preview is the SVG file itself.

A pair of bunny feet with a big pad and three toe pads cut out of each, as two loose pieces. Pair them with the ears on a door, a jar or a place card.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 79 mm (3.94 × 3.12 in), scales to any size
Pieces	2 separate pieces
Outlines to cut	10: 2 outer edges and 8 cut-outs
Cut length	745 mm at this size
Narrowest part	3.2 mm at this size
Nodes	66 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 1,602 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.79 in (25 × 20 mm)	0.81 mm	189 mm	120	Fine detail: vinyl and paper only, weed with care
2 × 1.59 in (51 × 40 mm)	1.6 mm	378 mm	30	Vinyl, card and thin sheet
3 × 2.38 in (76 × 60 mm)	2.4 mm	568 mm	12	Vinyl, card and thin sheet
4 × 3.17 in (102 × 81 mm)	3.3 mm	757 mm	6	Any material, including 3 mm wood and acrylic
6 × 4.76 in (152 × 121 mm)	4.9 mm	1,135 mm	2	Any material, including 3 mm wood and acrylic
8 × 6.34 in (203 × 161 mm)	6.5 mm	1,514 mm	1	Any material, including 3 mm wood and acrylic
12 × 9.52 in (305 × 242 mm)	9.8 mm	2,271 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bunny SVG files

← Bunny garland All 19 bunnies Bunny nose and whiskers →