Free bunny SVG

Bunny silhouette sitting SVG

Bunny silhouette sitting, as a solid black shape — Bunny silhouette sitting. The preview is the SVG file itself.

The Easter bunny shape: a hunched body, two ears up, a round tail and long back feet, in profile. A dot for the eye and a slit for the thigh are the only inside cuts.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	97 × 100 mm (3.8 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	3: 1 outer edge and 2 cut-outs
Cut length	498 mm at this size
Narrowest part	Nothing narrower than 6 mm at this size
Nodes	129 curve and line segments

Measured from the file. PNG: 1,935 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.97 × 1 in (25 × 25 mm)	Over 1.5 mm	126 mm	100	Vinyl, card and thin sheet
1.93 × 2 in (49 × 51 mm)	Over 3 mm	253 mm	25	Any material, including 3 mm wood and acrylic
2.9 × 3 in (74 × 76 mm)	Over 4.6 mm	379 mm	9	Any material, including 3 mm wood and acrylic
3.86 × 4 in (98 × 102 mm)	Over 6.1 mm	506 mm	6	Any material, including 3 mm wood and acrylic
5.8 × 6 in (147 × 152 mm)	Over 9.1 mm	759 mm	2	Any material, including 3 mm wood and acrylic
7.73 × 8 in (196 × 203 mm)	Over 12 mm	1,012 mm	1	Any material, including 3 mm wood and acrylic
11.59 × 12 in (294 × 305 mm)	Over 18 mm	1,518 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bunny SVG files

← Cute bunny sitting All 19 bunnies Bunny face with whiskers →