Free bunny SVG

Bunny monogram frame SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Bunny monogram frame, as a solid black shape
Bunny monogram frame. The preview is the SVG file itself.

A bunny head drawn as a ring with solid ears, and an open middle for an initial or a name. Add your letter and weld it to the ring before you cut.

What is in the file

Size59 × 100 mm (2.34 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length707 mm at this size
Narrowest part1 mm at this size
Nodes139 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,219 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.59 × 1 in (15 × 25 mm)0.25 mm180 mm150Too fine for most machines
1.19 × 2 in (30 × 51 mm)0.51 mm359 mm40Fine detail: vinyl and paper only, weed with care
1.78 × 3 in (45 × 76 mm)0.76 mm539 mm18Fine detail: vinyl and paper only, weed with care
2.38 × 4 in (60 × 102 mm)1 mm718 mm8Vinyl, card and thin sheet
3.56 × 6 in (91 × 152 mm)1.5 mm1,077 mm3Vinyl, card and thin sheet
4.75 × 8 in (121 × 203 mm)2 mm1,437 mm2Vinyl, card and thin sheet
7.13 × 12 in (181 × 305 mm)3 mm2,155 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bunny SVG files

← Bunny head silhouette All 19 bunnies Split bunny for a name →