Free bunny SVG

Floppy ear bunny SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Floppy ear bunny, as a solid black shape
Floppy ear bunny. The preview is the SVG file itself.

A lop-eared bunny face: both ears hang down past the cheeks, with a tuft of fur on top. Softer and rounder than the bunny with its ears up.

What is in the file

Size100 × 72 mm (3.94 × 2.83 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut8: 1 outer edge and 7 cut-outs
Cut length732 mm at this size
Narrowest part1 mm at this size
Nodes197 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,462 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.72 in (25 × 18 mm)0.25 mm186 mm130Too fine for most machines
2 × 1.44 in (51 × 37 mm)0.51 mm372 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.16 in (76 × 55 mm)0.76 mm558 mm15Fine detail: vinyl and paper only, weed with care
4 × 2.88 in (102 × 73 mm)1 mm744 mm6Vinyl, card and thin sheet
6 × 4.32 in (152 × 110 mm)1.5 mm1,116 mm2Vinyl, card and thin sheet
8 × 5.76 in (203 × 146 mm)2 mm1,487 mm2Vinyl, card and thin sheet
12 × 8.64 in (305 × 219 mm)3 mm2,231 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bunny SVG files

← Easter bunny face with a bow tie All 19 bunnies Bunny rabbit sitting up →