Mama bunny and baby SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A big bunny and a small one sitting together, the baby tucked in front of its mother. Their bodies overlap, so the pair cuts as one piece.
What is in the file
| Size | 100 × 82 mm (3.94 × 3.24 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 6: 1 outer edge and 5 cut-outs |
| Cut length | 580 mm at this size |
| Narrowest part | 3.2 mm at this size |
| Nodes | 214 curve and line segments |
Measured from the file. PNG: 2,000 × 1,660 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.82 in (25 × 21 mm) | 0.81 mm | 147 mm | 110 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.65 in (51 × 42 mm) | 1.6 mm | 295 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.47 in (76 × 63 mm) | 2.4 mm | 442 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.29 in (102 × 84 mm) | 3.3 mm | 589 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 4.94 in (152 × 125 mm) | 4.9 mm | 884 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6.58 in (203 × 167 mm) | 6.5 mm | 1,179 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 9.88 in (305 × 251 mm) | 9.8 mm | 1,768 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.