Free bunny SVG

Cute bunny sitting SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Cute bunny sitting, as a solid black shape
Cute bunny sitting. The preview is the SVG file itself.

A little bunny facing you, sitting with its big feet out in front and a pale tummy. The face, tummy and paw pads are cut through and the bunny is one piece.

What is in the file

Size44 × 100 mm (1.73 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut17: 1 outer edge and 16 cut-outs
Cut length749 mm at this size
Narrowest part1.2 mm at this size
Nodes259 curve and line segments
SymmetryMirror

Measured from the file. PNG: 921 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.44 × 1 in (11 × 25 mm)0.3 mm190 mm190Too fine for most machines
0.88 × 2 in (22 × 51 mm)0.61 mm380 mm55Fine detail: vinyl and paper only, weed with care
1.32 × 3 in (33 × 76 mm)0.91 mm571 mm24Fine detail: vinyl and paper only, weed with care
1.76 × 4 in (45 × 102 mm)1.2 mm761 mm12Vinyl, card and thin sheet
2.63 × 6 in (67 × 152 mm)1.8 mm1,141 mm4Vinyl, card and thin sheet
3.51 × 8 in (89 × 203 mm)2.4 mm1,522 mm3Vinyl, card and thin sheet
5.27 × 12 in (134 × 305 mm)3.7 mm2,283 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bunny SVG files

← Bunny nose and whiskers All 19 bunnies Bunny silhouette sitting →