Free bunny SVG

Bunny butt SVG

Bunny butt, as a solid black shape — Bunny butt. The preview is the SVG file itself.

A bunny seen from behind: a round body, a fluffy tail cut out as a scalloped hole, two big feet with pads and both ears up. The Easter favourite for doors and baskets.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	48 × 100 mm (1.9 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	10: 1 outer edge and 9 cut-outs
Cut length	506 mm at this size
Narrowest part	2.3 mm at this size
Nodes	131 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 1,006 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.48 × 1 in (12 × 25 mm)	0.58 mm	129 mm	170	Fine detail: vinyl and paper only, weed with care
0.97 × 2 in (25 × 51 mm)	1.2 mm	257 mm	50	Vinyl, card and thin sheet
1.45 × 3 in (37 × 76 mm)	1.8 mm	386 mm	21	Vinyl, card and thin sheet
1.93 × 4 in (49 × 102 mm)	2.3 mm	514 mm	10	Vinyl, card and thin sheet
2.9 × 6 in (74 × 152 mm)	3.5 mm	771 mm	3	Any material, including 3 mm wood and acrylic
3.86 × 8 in (98 × 203 mm)	4.7 mm	1,028 mm	3	Any material, including 3 mm wood and acrylic
5.8 × 12 in (147 × 305 mm)	7 mm	1,542 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bunny SVG files

← Bunny ears with one bent All 19 bunnies Bunny head silhouette →