Bunny outline SVG
The sitting bunny drawn as one even line about 2 mm wide in a closed loop. For colouring pages, foil, engraving and pen plotters.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 97 × 100 mm (3.8 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 2: 1 outer edge and 1 cut-out |
| Cut length | 778 mm at this size |
| Narrowest part | 2.4 mm at this size |
| Nodes | 214 curve and line segments |
Measured from the file. PNG: 1,935 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.97 × 1 in (25 × 25 mm) | 0.61 mm | 198 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 1.93 × 2 in (49 × 51 mm) | 1.2 mm | 395 mm | 25 | Vinyl, card and thin sheet |
| 2.9 × 3 in (74 × 76 mm) | 1.8 mm | 593 mm | 9 | Vinyl, card and thin sheet |
| 3.86 × 4 in (98 × 102 mm) | 2.4 mm | 790 mm | 6 | Vinyl, card and thin sheet |
| 5.8 × 6 in (147 × 152 mm) | 3.7 mm | 1,186 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.73 × 8 in (196 × 203 mm) | 4.9 mm | 1,581 mm | 1 | Any material, including 3 mm wood and acrylic |
| 11.59 × 12 in (294 × 305 mm) | 7.3 mm | 2,371 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Peeking bunny 
Mama bunny and baby 
Bunny garland 
Bunny feet 
Bunny nose and whiskers 
Cute bunny sitting 
Bunny silhouette sitting 
Bunny face with whiskers 