Bunny garland SVG
Three sitting bunnies nose to tail on a strip of ground, which joins them into one piece. Cut several and overlap the ends of the strips for a longer run of bunting.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 36 mm (3.94 × 1.41 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 1 outline |
| Cut length | 443 mm at this size |
| Narrowest part | 3.5 mm at this size |
| Nodes | 198 curve and line segments |
Measured from the file. PNG: 2,000 × 767 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.36 in (25 × 9 mm) | 0.89 mm | 113 mm | 210 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.72 in (51 × 18 mm) | 1.8 mm | 225 mm | 65 | Vinyl, card and thin sheet |
| 3 × 1.08 in (76 × 27 mm) | 2.7 mm | 338 mm | 27 | Vinyl, card and thin sheet |
| 4 × 1.44 in (102 × 36 mm) | 3.6 mm | 450 mm | 14 | Any material, including 3 mm wood and acrylic |
| 6 × 2.15 in (152 × 55 mm) | 5.3 mm | 675 mm | 5 | Any material, including 3 mm wood and acrylic |
| 8 × 2.87 in (203 × 73 mm) | 7.1 mm | 900 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 4.31 in (305 × 109 mm) | 11 mm | 1,350 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Bunny feet 
Bunny nose and whiskers 
Cute bunny sitting 
Bunny silhouette sitting 
Bunny face with whiskers 
Bunny ears 
Bunny ears with one bent 
Bunny butt 