Six-sided 3D flower pot vase SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A tall six-sided vase for paper or dried flowers, in one piece: six panels in a fan, the base hinged below one of them and a folded rim. Cut 235 mm wide, it is 101 mm tall, 67 mm across the rim and 42 mm across the base. It will not hold water.
What is in the file
| Size | 100 × 67 mm (3.94 × 2.62 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 79: 1 outer edge and 78 cut-outs |
| Cut length | 837 mm at this size |
| Narrowest part | 1.9 mm at this size |
| Nodes | 364 curve and line segments |
| Also found as | Paper vase SVG |
Measured from the file. PNG: 2,000 × 1,356 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.67 in (25 × 17 mm) | 0.48 mm | 213 mm | 140 | Too fine for most machines |
| 2 × 1.33 in (51 × 34 mm) | 0.97 mm | 425 mm | 35 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2 in (76 × 51 mm) | 1.4 mm | 638 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.66 in (102 × 68 mm) | 1.9 mm | 850 mm | 8 | Vinyl, card and thin sheet |
| 6 × 3.99 in (152 × 101 mm) | 2.9 mm | 1,276 mm | 2 | Vinyl, card and thin sheet |
| 8 × 5.32 in (203 × 135 mm) | 3.9 mm | 1,701 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.98 in (305 × 203 mm) | 5.8 mm | 2,551 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More 3D flower pot SVG files
-
3D flower pot to print and cut by hand Outline · 18 pieces -
3D flower pot of tulips made up, in five colours Layered · 8 pieces -
3D flower pot with a rim band Solid · 3 pieces -
3D flower pot on a saucer Solid · 5 pieces -
Tall 3D flower pot with a scalloped rim Solid · 2 pieces -
Low 3D flower pot with heart cut-outs Solid · 2 pieces -
Two mini 3D flower pots for favours Solid · 4 pieces -
3D flower pot with three tulips Solid · 7 pieces
← Square 3D flower pot planter All 10 3D flower pots 3D flower pot to print and cut by hand →