Square 3D flower pot planter SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A square planter in one piece: the base in the middle, four walls that lean out, a tab on each seam and a rim flap that folds down outside to make a thick edge. Cut 190 mm tall, it is 80 mm square at the rim, 51 mm at the base and 55 mm tall.
What is in the file
| Size | 100 × 100 mm (3.94 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 69: 1 outer edge and 68 cut-outs |
| Cut length | 963 mm at this size |
| Narrowest part | 2.1 mm at this size |
| Nodes | 312 curve and line segments |
Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 1 in (25 × 25 mm) | 0.53 mm | 245 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 2 × 2 in (51 × 51 mm) | 1.1 mm | 489 mm | 25 | Vinyl, card and thin sheet |
| 3 × 3 in (76 × 76 mm) | 1.6 mm | 734 mm | 9 | Vinyl, card and thin sheet |
| 4 × 4 in (102 × 102 mm) | 2.1 mm | 978 mm | 4 | Vinyl, card and thin sheet |
| 6 × 6 in (152 × 152 mm) | 3.2 mm | 1,468 mm | 1 | Any material, including 3 mm wood and acrylic |
| 8 × 8 in (203 × 203 mm) | 4.3 mm | 1,957 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 12 in (305 × 305 mm) | 6.4 mm | 2,935 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More 3D flower pot SVG files
-
Six-sided 3D flower pot vase Solid · one piece -
3D flower pot to print and cut by hand Outline · 18 pieces -
3D flower pot of tulips made up, in five colours Layered · 8 pieces -
3D flower pot with a rim band Solid · 3 pieces -
3D flower pot on a saucer Solid · 5 pieces -
Tall 3D flower pot with a scalloped rim Solid · 2 pieces -
Low 3D flower pot with heart cut-outs Solid · 2 pieces -
Two mini 3D flower pots for favours Solid · 4 pieces
← 3D flower pot with three tulips All 10 3D flower pots Six-sided 3D flower pot vase →