Tall 3D flower pot with a scalloped rim SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A tall, slim pot with 12 half rounds along its rim, a whole number so that they meet at the seam. Two pieces: wall and base. Cut 195 mm wide, it is 60 mm across the rim, 44 mm across the base and 72 mm tall to the dips, and the scallops stand 8 mm higher. Loose pieces.
What is in the file
| Size | 100 × 77 mm (3.94 × 3.02 in), scales to any size |
|---|---|
| Pieces | 2 separate pieces |
| Outlines to cut | 33: 2 outer edges and 31 cut-outs |
| Cut length | 564 mm at this size |
| Narrowest part | 2 mm at this size |
| Nodes | 281 curve and line segments |
Measured from the file. PNG: 2,000 × 1,552 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.77 in (25 × 19 mm) | 0.51 mm | 143 mm | 120 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.53 in (51 × 39 mm) | 1 mm | 287 mm | 35 | Vinyl, card and thin sheet |
| 3 × 2.3 in (76 × 58 mm) | 1.5 mm | 430 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.07 in (102 × 78 mm) | 2 mm | 573 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.6 in (152 × 117 mm) | 3 mm | 860 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6.14 in (203 × 156 mm) | 4.1 mm | 1,146 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 9.2 in (305 × 234 mm) | 6.1 mm | 1,719 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More 3D flower pot SVG files
-
Low 3D flower pot with heart cut-outs Solid · 2 pieces -
Two mini 3D flower pots for favours Solid · 4 pieces -
3D flower pot with three tulips Solid · 7 pieces -
Square 3D flower pot planter Solid · one piece -
Six-sided 3D flower pot vase Solid · one piece -
3D flower pot to print and cut by hand Outline · 18 pieces -
3D flower pot of tulips made up, in five colours Layered · 8 pieces -
3D flower pot with a rim band Solid · 3 pieces
← 3D flower pot on a saucer All 10 3D flower pots Low 3D flower pot with heart cut-outs →