3D flower pot on a saucer SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A squat pot on its saucer. The saucer is a disc inside a shallow rim that leans out, cut as most of a ring with teeth on its inner edge. Cut 220 mm tall, the pot is 67 mm across the rim, 45 mm across the base and 49 mm tall, and the saucer is 68 mm across. Loose pieces.
What is in the file
| Size | 93 × 100 mm (3.66 × 3.94 in), scales to any size |
|---|---|
| Pieces | 5 separate pieces |
| Outlines to cut | 45: 5 outer edges and 40 cut-outs |
| Cut length | 1,038 mm at this size |
| Narrowest part | 1.3 mm at this size |
| Nodes | 299 curve and line segments |
Measured from the file. PNG: 1,863 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.93 × 1 in (24 × 25 mm) | 0.33 mm | 264 mm | 100 | Too fine for most machines |
| 1.86 × 2 in (47 × 51 mm) | 0.66 mm | 527 mm | 25 | Fine detail: vinyl and paper only, weed with care |
| 2.79 × 3 in (71 × 76 mm) | 0.99 mm | 791 mm | 12 | Fine detail: vinyl and paper only, weed with care |
| 3.72 × 4 in (94 × 102 mm) | 1.3 mm | 1,055 mm | 6 | Vinyl, card and thin sheet |
| 5.57 × 6 in (142 × 152 mm) | 2 mm | 1,582 mm | 2 | Vinyl, card and thin sheet |
| 7.43 × 8 in (189 × 203 mm) | 2.6 mm | 2,109 mm | 1 | Vinyl, card and thin sheet |
| 11.15 × 12 in (283 × 305 mm) | 4 mm | 3,164 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More 3D flower pot SVG files
-
Tall 3D flower pot with a scalloped rim Solid · 2 pieces -
Low 3D flower pot with heart cut-outs Solid · 2 pieces -
Two mini 3D flower pots for favours Solid · 4 pieces -
3D flower pot with three tulips Solid · 7 pieces -
Square 3D flower pot planter Solid · one piece -
Six-sided 3D flower pot vase Solid · one piece -
3D flower pot to print and cut by hand Outline · 18 pieces -
3D flower pot of tulips made up, in five colours Layered · 8 pieces
← 3D flower pot with a rim band All 10 3D flower pots Tall 3D flower pot with a scalloped rim →