3D flower pot of tulips made up, in five colours SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
What the tulip pattern makes, drawn from the side: the pot in its own proportions, with the three tulips spread a little so that each one shows. Pot, rim, soil, stems and flowers each cut as flat pieces too, for a card front.
What is in the file
| Size | 65 × 100 mm (2.55 × 3.94 in), scales to any size |
|---|---|
| Pieces | 8 separate pieces |
| Outlines to cut | 8 outlines |
| Cut length | 829 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 103 curve and line segments |
| Layers | 5: pot, rim, soil, stems and leaves and tulips |
Measured from the file. PNG: 1,321 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.65 × 1 in (16 × 25 mm) | Over 1.5 mm | 211 mm | 140 | Vinyl, card and thin sheet |
| 1.29 × 2 in (33 × 51 mm) | Over 3 mm | 421 mm | 40 | Any material, including 3 mm wood and acrylic |
| 1.94 × 3 in (49 × 76 mm) | Over 4.6 mm | 632 mm | 15 | Any material, including 3 mm wood and acrylic |
| 2.59 × 4 in (66 × 102 mm) | Over 6.1 mm | 842 mm | 8 | Any material, including 3 mm wood and acrylic |
| 3.88 × 6 in (99 × 152 mm) | Over 9.1 mm | 1,263 mm | 2 | Any material, including 3 mm wood and acrylic |
| 5.18 × 8 in (131 × 203 mm) | Over 12 mm | 1,685 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.76 × 12 in (197 × 305 mm) | Over 18 mm | 2,527 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More 3D flower pot SVG files
-
3D flower pot with a rim band Solid · 3 pieces -
3D flower pot on a saucer Solid · 5 pieces -
Tall 3D flower pot with a scalloped rim Solid · 2 pieces -
Low 3D flower pot with heart cut-outs Solid · 2 pieces -
Two mini 3D flower pots for favours Solid · 4 pieces -
3D flower pot with three tulips Solid · 7 pieces -
Square 3D flower pot planter Solid · one piece -
Six-sided 3D flower pot vase Solid · one piece
← 3D flower pot to print and cut by hand All 10 3D flower pots 3D flower pot with a rim band →