3D flower pot with a rim band SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A terracotta pot in three pieces: a wall that rolls into a cone, with teeth along its foot, a base disc and a curved band that makes the thick rim. Cut 220 mm wide, the pot is 71 mm across the rim, 46 mm across the base and 63 mm tall, with a rim 14 mm deep. Loose pieces.
What is in the file
| Size | 100 × 90 mm (3.94 × 3.52 in), scales to any size |
|---|---|
| Pieces | 3 separate pieces |
| Outlines to cut | 30: 3 outer edges and 27 cut-outs |
| Cut length | 672 mm at this size |
| Narrowest part | 2 mm at this size |
| Nodes | 174 curve and line segments |
Measured from the file. PNG: 2,000 × 1,798 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.9 in (25 × 23 mm) | 0.51 mm | 171 mm | 110 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.79 in (51 × 45 mm) | 1 mm | 341 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.69 in (76 × 68 mm) | 1.5 mm | 512 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.58 in (102 × 91 mm) | 2 mm | 683 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.37 in (152 × 136 mm) | 3 mm | 1,024 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 7.16 in (203 × 182 mm) | 4.1 mm | 1,366 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 10.74 in (305 × 273 mm) | 6.1 mm | 2,048 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More 3D flower pot SVG files
-
3D flower pot on a saucer Solid · 5 pieces -
Tall 3D flower pot with a scalloped rim Solid · 2 pieces -
Low 3D flower pot with heart cut-outs Solid · 2 pieces -
Two mini 3D flower pots for favours Solid · 4 pieces -
3D flower pot with three tulips Solid · 7 pieces -
Square 3D flower pot planter Solid · one piece -
Six-sided 3D flower pot vase Solid · one piece -
3D flower pot to print and cut by hand Outline · 18 pieces
← 3D flower pot of tulips made up, in five colours All 10 3D flower pots 3D flower pot on a saucer →