3D flower pot to print and cut by hand SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The classic pot as a drawing: a solid line where you cut and dashes on the long fold. Print it 220 mm wide on card, cut it out with scissors, snip between the teeth and fold each one in. The curved band goes round the top.
What is in the file
| Size | 100 × 90 mm (3.94 × 3.52 in), scales to any size |
|---|---|
| Pieces | 18 separate pieces |
| Outlines to cut | 21: 18 outer edges and 3 cut-outs |
| Cut length | 1,220 mm at this size |
| Narrowest part | 1.2 mm at this size |
| Nodes | 211 curve and line segments |
Measured from the file. PNG: 2,000 × 1,798 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.9 in (25 × 23 mm) | 0.3 mm | 310 mm | 110 | Too fine for most machines |
| 2 × 1.79 in (51 × 45 mm) | 0.61 mm | 620 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.69 in (76 × 68 mm) | 0.91 mm | 930 mm | 12 | Fine detail: vinyl and paper only, weed with care |
| 4 × 3.58 in (102 × 91 mm) | 1.2 mm | 1,240 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.37 in (152 × 136 mm) | 1.8 mm | 1,859 mm | 2 | Vinyl, card and thin sheet |
| 8 × 7.16 in (203 × 182 mm) | 2.4 mm | 2,479 mm | 1 | Vinyl, card and thin sheet |
| 12 × 10.74 in (305 × 273 mm) | 3.7 mm | 3,719 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More 3D flower pot SVG files
-
3D flower pot of tulips made up, in five colours Layered · 8 pieces -
3D flower pot with a rim band Solid · 3 pieces -
3D flower pot on a saucer Solid · 5 pieces -
Tall 3D flower pot with a scalloped rim Solid · 2 pieces -
Low 3D flower pot with heart cut-outs Solid · 2 pieces -
Two mini 3D flower pots for favours Solid · 4 pieces -
3D flower pot with three tulips Solid · 7 pieces -
Square 3D flower pot planter Solid · one piece
← Six-sided 3D flower pot vase All 10 3D flower pots 3D flower pot of tulips made up, in five colours →